Emergency Exit Sticker with Break Glass Symbol – External, Class 2 Reflective (600mm x 80mm)

Description

Our external Emergency Exit sticker with break glass symbol (600mm x 80mm) marks the emergency exit on the outside of buses, coaches and school buses. It carries EMERGENCY EXIT lettering plus a break glass pictogram showing a hand breaking the window, all in red, printed on Class 2 retroreflective vinyl that bounces headlight and torch light straight back to the viewer, so rescuers and bystanders can locate the exit at night. Australian Design Rule 58/00 requires emergency exits on hire and reward buses to be identified by a prominent notice both inside and outside the vehicle, and this decal covers the outside.

Features

• Size: 600mm x 80mm (width x height)
• Class 2 retroreflective vinyl for night visibility under headlights and torches
• External mount, made for the outside of the bus
• Includes the break glass pictogram
• Super strong adhesive, simply peel and stick
• Suits all Australian states and territories and all bus models

Specifications

Where to fit it

Apply the decal on the outside of the bus directly above or below the emergency exit window or door, level and centred on the exit. The break glass pictogram shows that the window is opened by breaking the glass with the emergency hammer. For the inside of the same exit, choose a glow in the dark internal decal from the size table below.

Emergency exit marking regulations

Emergency exit markings on Australian buses come from ADR 58/00 – Requirements for Omnibuses Designed for Hire and Reward. Clause 58.12.3 requires each emergency exit to be “identified by a prominent notice inside and outside displaying the words EMERGENCY EXIT”, together with instructions or symbols showing how to open it unless that is self-evident.

• ADR 58/00 Requirements for Omnibuses Designed for Hire and Reward (Federal Register of Legislation)
• Australian Design Rules (Department of Infrastructure, Transport, Regional Development, Communications, Sport and the Arts)
• AS 1906.1 Retroreflective materials and devices for road traffic control purposes – Retroreflective sheeting (Standards Australia)
• School bus regulations by state and territory

State and territory bus regulators and school bus contracts can add their own requirements, so check with your regulator if you are unsure.

Emergency exit decal sizes

Every size is listed below. External decals are Class 2 reflective for the outside of the bus; internal decals are glow in the dark for the inside.

External emergency exit decals (Class 2 reflective)

Internal emergency exit decals (glow in the dark)

Suits all states and bus models

States and territories: Victoria, New South Wales, Queensland, South Australia, Western Australia, Tasmania, Northern Territory, Australian Capital Territory.

Bus models: Toyota HiAce Commuter, Toyota Coaster, Mitsubishi Rosa, LDV, Mercedes, Ford Transit, Yutong, King Long, iBus, Volvo, Volgren, Irizar, and any other bus, coach or school bus with a flat panel above or below the exit.

See our full range of bus and school bus signage, including fasten seatbelt, no smoking and CCTV stickers.

Frequently asked questions

Is this Emergency Exit sticker for the inside or outside of the bus?
It is an external decal for the outside of the bus. Its Class 2 retroreflective face is designed for exterior use and night-time visibility. For inside the bus, use one of our glow in the dark internal decals.

What does Class 2 reflective mean?
Class 2 is a grade of retroreflective sheeting defined in Australian Standard AS 1906.1. It returns light from headlights and torches back towards the viewer, so the sign stands out at night.

Which size should I choose?
Pick the largest size that fits the flat panel above or below the exit. Smaller sizes suit minibuses such as the Toyota HiAce Commuter, LDV Deliver 9 and Mitsubishi Rosa; larger sizes suit coaches and route buses with wide exit windows. All sizes are listed in the tables on this page.

Do I need emergency exit markings inside and outside?
ADR 58/00 (clause 58.12.3) requires each emergency exit on a bus designed for hire and reward to be identified by a prominent notice inside and outside displaying the words EMERGENCY EXIT. Many operators fit an external reflective decal and an internal glow in the dark decal at each exit. Check your state or territory requirements on our school bus regulations page.